SPC stone-plastic floor five-roll production line equipment, the equipment uses imported original Schneider servo control system to extrude the base material, hot-coated decorative film and wear-resistant layer, to achieve one-step method, at the same time completed on the same equipment. First, the surface can be hot-coated with various color decorative film layer; second, can be directly hot-coated on the board decorative layer wear-resistant layer; third, can be directly made on a variety of relief wood patterns and various patterns; fourth, the underlying cushion muffler layer, can also be directly hot-coated. All four above can be combined into one multi-layer production equipment at the same time. Can reduce the surface treatment pattern, wear-resistant equipment. Reduce the investment of labor and equipment, greatly reduce the production cost of SPC flooring.

Every component comes from international standards. No matter where you come from, the production line equipment of stone and plastic floor made by Jiangsu Dixiang is globally integrated.

Compared with other floor decoration materials, the stone-plastic floor of Dixiang, Jiangsu Province has the following advantages:

1. Green environmental protection: The main raw material for producing stone-plastic floor is natural stone powder, which does not contain any radioactive elements tested by the state authority. It is a new type of green floor decoration material. Any qualified stone and plastic floor needs to pass IS09000 international quality system certification and ISO14001 international green environmental protection certification.

2. Ultra-light and ultra-thin: The stone-plastic floor is only 2-3 mm thick, and the weight per square meter is only 2-3 KG, which is less than 10% of the common floor materials. In high-rise buildings, there are incomparable advantages for load-bearing and space saving. At the same time, it has special advantages in the reconstruction of old buildings.

3. Super abrasion resistance: There is a special transparent abrasion-resistant layer on the surface of stone-plastic floor, which is processed by high technology. Its abrasion resistance can reach 300,000 revolutions. In the traditional floor materials, the wear-resistant reinforced wood flooring has only 13,000 revolutions, and the good reinforced wood flooring has only 20,000 revolutions. The super-strong wear-resistant layer specially treated on the surface fully guarantees the excellent wear resistance of the floor materials. The wear-resistant layer on the surface of the stone-plastic floor can be used for 5-10 years under normal conditions according to its thickness. The thickness and quality of the wear-resistant layer directly determine the service time of the stone-plastic floor. The standard test results show that the wear-resistant layer with 0.55mm thickness can be used for more than 5 years under normal conditions, and 0.7% under normal conditions Mm thick wear-resistant layer ground is enough to use for more than 10 years, so it is super-strong wear-resistant. Because of its super wear resistance, stone floor is more and more popular in hospitals, schools, office buildings, shopping malls, supermarkets, transportation and other places with large traffic.

4. High elasticity and super impact resistance: The stone-plastic floor is soft in texture, so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its feet feel comfortable is called "soft gold of ground materials". At the same time, the stone-plastic floor has strong impact resistance, and it has strong elasticity recovery for the impact damage of heavy objects and will not cause damage. Excellent stone flooring can minimize the damage of the ground to human body and disperse the impact on the foot. The latest research data show that after the excellent stone flooring is laid in the space with a large flow of people, the rate of falls and injuries is reduced by nearly 70% compared with other flooring.

5. Super anti-skid: The wear-resistant layer on the surface of stone-plastic floor has special anti-skid property, and compared with ordinary ground materials, stone-plastic floor feet feel more astringent in the case of sticky water, and it is not easy to slide to, that is, the more water the more astringent. Therefore, the preferred ground decoration materials are airports, hospitals, kindergartens, schools and other public places with high public safety requirements, which have been very popular in China.

6. Fire-proof and flame-retardant: Qualified stone-plastic floor fire-proof indicators can reach B1 level, B1 level that is to say, fire-proof performance is excellent, second only to stone. Stone flooring itself does not burn and can prevent combustion; smoke generated by passive ignition of high-quality stone flooring will never harm the human body and will not produce toxic and harmful gases (according to the figures provided by the security department: 95% of the people injured in the fire are due to the toxic smoke and gases generated by combustion).

7. Waterproof and moisture-proof: Because the main component of stone floor is vinyl resin, and water has no affinity, so naturally not afraid of water, as long as it is not immersed for a long time, it will not be damaged; and it will not mildew because of high humidity.

8. Sound absorption and noise prevention: stone floor materials can not be compared with the sound absorption effect, its sound absorption can reach 20 decibels, so in the need for quiet environment such as hospital wards, school libraries, lecture halls, theatres and other stone floor selection, you no longer need to worry about the impact of high-heeled shoes and the sound of the ground on your thinking, stone floor can provide you with more comfortable, more. Increase the humanized living environment.

9. Antimicrobial properties: The surface of stone-plastic floor has been treated with special antimicrobial agents. Some excellent stone-plastic floor surfaces have also added special antimicrobial agents, which have strong killing ability and inhibiting bacterial reproduction for most bacteria.

10. Small seam and seamless welding: After strict construction and installation, the seam of the stone-plastic floor with special pattern is very small, and the seam can hardly be seen from a long view. This is impossible for ordinary floor, and therefore the overall effect and visual effect of the ground can be optimized to the greatest extent. The environment requiring higher overall effect of the ground, such as the office, and the requirement for sterilization and disinfection is high. The environment such as the hospital operating room and other stone floor is the best choice.

11. Cutting and splicing is simple and easy: with a better artistic knife, you can tailor at will. At the same time, you can use different material combinations to give full play to the designer's intelligence and wisdom to achieve the best decorative effect; enough to make your ground a work of art, make your living space an artistic palace, full of artistic flavor.

12. Installation and construction is fast: the installation and construction of stone-plastic floor is very fast, without cement mortar, and the ground condition is good with special environmental protection floor glue, which can be used 24 hours later.

13. Variety of designs and colours: There are many kinds of designs and colours of stone-plastic floor, such as carpet pattern, stone pattern, wood floor pattern, etc., and even personalized customization can be realized. The pattern is lifelike and beautiful, with rich and colorful accessories and decorative strips, it can combine the beautiful decorative effect.

14. Resistance to acid and alkali corrosion: Tested by authoritative institutions, stone floor has strong resistance to acid and alkali corrosion, can withstand the test of harsh environment, and is very suitable for use in hospitals, laboratories, research institutes and other places.

15. Thermal conductivity and warmth preservation: The stone-plastic floor has good thermal conductivity, uniform heat dissipation, small coefficient of thermal expansion and relatively stable. In Europe, America, Japan, Korea and other countries and regions, stone plastic floor is the preferred product of geothermal thermal thermal conductive floor, which is very suitable for family paving, especially in the cold areas of northern China.

16. Maintenance is convenient: the stone floor is very convenient to maintain, the ground is dirty and can be wiped with a mop. If you want to maintain the lasting brightness of the floor, you just need to wax regularly, and the number of maintenance is far lower than other floors.

17. Environmental protection and renewable: Today is an era of pursuing sustainable development. New materials and new energy are emerging in an endless stream. Stone-plastic floor is the only renewable ground decoration material, which has great significance for protecting our natural resources and ecological environment.

18. International Popularity: Stone-plastic floor is a new type of floor decoration material widely used in the world today. It is popular in Europe, America and Asia-Pacific markets. It is also very popular in China and has a very broad development prospects.